Another knife setting method

Modified on 2011/12/18 21:20 by krucker Categorized as Uncategorized

''This method of setting knives on a Yager and K2000 planer is about a simple as it gets.''

====Another knife setting method====
'''Author unknown'''{BR}

[image||{UP}K2000/Yagerknives.jpg|]

To adjust knives, lightly tighten so blade holds but slips. Put 1/16” acrylic sheet on table & raise so that roller springs are compressed at least 1/8”. Run knife roller backwards by hand to push blades into position. Tighten.

'''TAKE NO MORE THAN 1/16” PER PASS.'''

Meta Keywords:
Meta Description:
Change Comment:

	Welcome Guest, • Login
Wiki Home \| VintageMachinery.org Home \| OWWM.org Home \| Donate	Search the Wiki: »